I ordered a fuse and tail only to use with my existing Wizard BPV wings. I already have the standard V-tail fuse with elevators, not the full flying stab, that I got with the wings and I was curious to see if there is a noticeable difference in how the two tails fly. The finished weights are within about an ounce so it should be down to the tail for any differences in flight.
 |
Photo: ET-Air |
The cross tail has a pretty cool tail arrangement. The stab bolts on and the rudder, which contains the rudder servo, a JR DS-281 in my case, plugs in on top of the elevator. The rudder servo mount and linkage must have been tailor made for this servo because it fits perfectly.
I used a Hoopes harness in the fuse. I carefully lined up the connectors so I could use the existing wings I have. In fact my last 4 Wizards all could have interchanged parts.
Next little project will be to finish the C-93 wings I have so I can use them on either fuse as well.
Here's hoping that the wind will be good soon. I am anxious to fly the new tail!
TrackBack URI for this entry
Subscribe to this comment's feed
| < Prev | Next > |
|---|
