From slopeflyer.com

Opus
Gary Legerton's Opus Finishing Kit
By Greg Smith
Feb 14, 2003, 23:15

The Opus has a nose with no hatch, canopy or nose cone. It uses a pallet to hold the radio and servos in the nose. You could do the fabricating yourself or you could be smart and get Gary's Opus retro-fit tray assembly kit! Plus, he includes all the things not included from the manufacturer.

Features:

  1. CNC machined G10/FR4 fiberglass tray assembly.
  2. CNC machined G10/FR4 fiberglass replacement control horns
  3. Milled aluminum servo mount system
  4. Servo mount is pre-drilled and tapped to universally fit Hitec HS85, JR 341,351,DS368 and Futaba Micro servos.
  5. Switch/charge assembly mount on to aluminum servo box.
  6. Pre-made carbon pushrod and housing assembly. Ready to install.
  7. Lead shot nose weight pre-measured for balancing the plane.
  8. Bolt down ballast system to add 20oz. of additional ballast!
  9. Easy 2 step installation with no unsightly holes to be drilled into the fuselage.
  10. All necessary hardware for installation.
  11. Detailed instructions set for a easy installation.
Folks, I don't have current contact info fro Gary but you might try RCGroups to see if a kit is available.

© Copyright 2000-2007 by slopeflyer.com